Is your Company in our Directory?
Memphis Pump & Manufacturing Co Inc
VOLUTE: Close grained cast iron construction with large suction and discharge ports to prevent cavitation.
The MPH Series is available in sizes delivering from 10gpm @ 48ft. of head, up to 280gpm/@80ft of head. Almost any volume/head can be accommodated with the properly selected pump-motor combination.
VOLUTE: Close grained cast iron construction with large suction and discharge ports to prevent cavitation. Volutes have pipe plugs for draining and venting the pump, and can be rotated 90° increments to conform to piping layouts.
IMPELLER: One-piece, typically brass, vibration free operation. Mounts directly onto the motor shaft, either by being keyed or threaded.
MOTORS: All motors are NEMA standard, 56J threaded shaft or JM type close coupled pump motors.
SHAFT SEAL: Mechanical type face seals, self adjusting for wear, and easily field replaceable.
SHAFT SLEEVE: Pumps built on type JM close coupled pump motors have bronze sleeves that seal to the shaft with an O-ring. Stainless steel sleeves are also available
| Address | 4000 Winchester Rd Memphis, TN 38118-4900 |
| Phone | (901) 365-6330 |
| Website | www.memphispumps.com |
Dimensions & Curves
MPH-100 Series Pumps
MPH-150-1.5-3HP Pump
MPH-150-5HP Pump
MPH-200-3HP Pump
MPH-200-5HP Pump
MPH-200-7.5HP Pump
Call for sizes not shown!
1-800-431-1562The MPH Series is available in sizes delivering from 10gpm @ 48ft. of head, up to 280gpm/@80ft of head. Almost any volume/head can be accommodated with the properly selected pump-motor combination.
VOLUTE: Close grained cast iron construction with large suction and discharge ports to prevent cavitation. Volutes have pipe plugs for draining and venting the pump, and can be rotated 90° increments to conform to piping layouts.
IMPELLER: One-piece, typically brass, vibration free operation. Mounts directly onto the motor shaft, either by being keyed or threaded.
MOTORS: All motors are NEMA standard, 56J threaded shaft or JM type close coupled pump motors.
SHAFT SEAL: Mechanical type face seals, self adjusting for wear, and easily field replaceable.
SHAFT SLEEVE: Pumps built on type JM close coupled pump motors have bronze sleeves that seal to the shaft with an O-ring. Stainless steel sleeves are also available
Related items:
Blount Excavating, Inc. was started in 1979 with one machine and a desire to be successful.
- 3700 Garner Cir Maryville, TN 37803-2979
- (865) 984-4060
Gene Holmes, Inc. of Memphis, TN uses a process by which materials contained in tanks, containers, and surface impoundments are loaded by pneumatic
- 5301 Hwy 51 N Memphis, TN 38101-
- (901) 357-1200
Don Huckaby Plummbing Company, Inc. is family owned and opperated and has served the greater Memphis, TN area for over 25 years and offer commercial,
- 5294 Crestview Dr Memphis, TN 38134-6427
- (901) 384-0378
Welcome to the Jones Bros Tree Company, Inc. and Plant Health Care Specialists, LLC website.
- 7892 Summer Ave Memphis, TN 38133-1313
- (901) 377-8733
A family owned plumbing wholesaler, with two locations, Memphis and Nashville. A brief description of stocked products and contact numbers.
- 1324 Springbrook Ave Memphis, TN 38116-1883
- (901) 332-8120
Tennessee
company, product and service directory
company, product and service directory
Business Network 2008-2024
All rights reserved
All rights reserved